Simple and professional Revit course to master modeling of steel structure warehouse using standard sections.
Hello, welcome to
What you’ll learn
- Complete modeling of all steel structure warehouse members.
- Create and modify steel connections between all members.
- Steel Fabrication Elements ( plate, bolts, welds ).
- Steel Modifiers ( shorten, contour cut ).
- Insert standard sections for columns and beams from Revit library.
Course Content
- Start –> 2 lectures • 11min.
- Modeling –> 28 lectures • 4hr 35min.
Requirements
Hello, welcome to
Revit 2022: Complete Steel Structure “Warehouse” Modeling
In this course, we will start modeling from start to finish without skipping a single step.
First, we will finish modeling the members of the steel structure warehouse using standard sections from Revit library, then we will add connections to all joints between the members using the downloaded Revit connections and we will customize or create our new connections.
The steel structure warehouse project will be divided into three courses, this course is for the modeling part, and it will cover all aspects of steel structure warehouse modeling in Revit, where we will explain in detail how to create a project from start to finish, including creating and modifying connections.
To get the most out of the course, it is preferable to open Revit and start applying step by step with videos.
Finally, at the end of the course, you will be able to create a complete Revit model for any steel structure warehouse or similar projects.
What you will learn in this course?
- Starting new project
- Editing project units
- Modifying and creating levels
- Modifying and creating grids
- Inserting standard columns and beams section from Revit library
- Creating portal frame
- Creating horizontal bracing
- Creating vertical and longitudinal bracing
- Creating end gable columns
- Creating isolated foundations
- Creating purlins
- Creating side girts
- Creating end girts
- Creating and modifying knee of frame connection
- Creating and modifying apex connection
- Creating and modifying purlins connection
- Creating and modifying base plate connection
- Creating and modifying horizontal bracing connection
- Creating and modifying vertical and longitudinal connection
- Creating and modifying side girts connection
- Creating and modifying end girts connection
- Creating and modifying end gable column connection
- Creating and modifying eave purlin connection
- Creating and modifying door header connection
- Steel Connection ( duplicate type, modify parameters, customize, break )
- Steel Fabrication Elements ( plate, bolts, welds )
- Steel Modifiers ( shorten, contour cut )
- Work Plane ( set work plane, show work plane, reference work plane )
- And more…